BTECH Relay ATAK Plugin 2.0 Quick Start Guide

1. Open the EUD Quick Settings Panel.
   Swipe down from the top of the screen to access the quick toggles, then hold Bluetooth.
2. 

Pair the Radio.
Tap Pair new device → wait for the device scan → select UV-PRO from the list.
Once paired, it will appear under “Paired devices.”
If the radio does not appear, return to the radio’s Settings, ensure Bluetooth is enabled and the radio is in pairing mode, then try scanning again.

3. Connect via the Plugin.
Open the BTECH Relay plugin in ATAK → tap Connect → from Select Paired Radio, choose UV-PRO.

4. Verify Connection.
The plugin should now display the radio’s information, including MAC address, battery, channel, and encryption status.

If it still shows “Not connected – tap Connect to start”, repeat from step 3.

FAQ