Why the Deployment Kit
Standing up a team used to mean configuring each EUD by hand — one device, one cable, one operator, over and over. The Data Deployment Kit collapses that into a single pass: dock up to ^10 GoTAK EUDs^, clone one configured ATAK environment across ^all of them at once^, push APKs and mission profiles from ^one control tablet^ — charged and ready, straight out of a carry-on case.
GoTAK EUDs, one pass
Sync transfer speed
Sideload + deploy
Case — carry-on compliant
Inside the kit
Mission Control
MAAK Mission Control sees every docked EUD — battery, storage, temperature, uptime — and pushes to all of them at once: clone one configured ATAK environment across the fleet, sideload APKs, and save or load mission profiles for rapid provisioning.
Power + sync
Every bay powers and syncs an EUD over USB-C — up to ten at once, at data speeds up to 5 Gbps — with an on-board compute module driving the whole rack. Devices come out topped off and identical.
Dock
Each EUD seats into a retention bay with a USB-C connection and is held fast for transport. An internal storage compartment keeps cables and accessories in the same case.
Transport
The whole station lives in a rugged, carry-on-compliant case — padlock-compatible, sealed against the elements, and rated to run from 0 to 50 °C. Grab the handle and go.
Deploy
Open the lid and the team's picture stands up from a single device: a control tablet in the lid, up to ten EUDs provisioned in the base — charged, identical, and ready to hand out and move.
See it in the field
Field provisioning
Dock the EUDs, clone the mission from one control tablet, and hand out devices that are charged, identical, and ready. No per-device setup — the kit does the whole fleet at once.
Two ways to provision
Standing up a team by hand means configuring, updating, and charging each EUD on its own. The Data Deployment Kit does all ten in a single pass — same environment, same APKs, same profile, every time.
| By hand Device by device | Deployment Kit Data Deployment Kit This kit | |
|---|---|---|
| Devices at once | Device by device One EUD configured at a time. | Data Deployment Kit Up to 10 EUDs provisioned in a single pass. |
| ATAK setup | Device by device Repeated by hand on every device. | Data Deployment Kit Clone one configured environment across the fleet. |
| APKs | Device by device Sideloaded per device. | Data Deployment Kit Deployed to every connected EUD from one app. |
| Charging | Device by device Separate chargers and cables. | Data Deployment Kit Integrated power tops off every docked EUD. |
| Consistency | Device by device Drift between hand-built devices. | Data Deployment Kit Identical profile on every EUD, every time. |
| Transport | Device by device Loose devices and cables. | Data Deployment Kit Rugged, carry-on-compliant case, padlock-ready. |
Same EUDs. A fleet provisioned in one pass, not one at a time.
Pair it with GoTAK EUDs →FAQ
Procurement and integration support direct from sales.
Up to ten. Each docks into its own bay over USB-C, and the kit powers and syncs all ten simultaneously.
It's built for GoTAK EUDs. A control device (Samsung Galaxy Tab Active 5) runs MAAK Mission Control in the lid, and up to ten EUDs provision in the base — each in a MAAK Forge Case.
It manages every connected EUD from one screen: clone a configured ATAK environment across the fleet, sideload APKs, save and load mission profiles, and watch battery, storage, and temperature per device.
Data transfers run at up to 5 Gbps over USB-C, so cloning ATAK and pushing APKs across ten devices is a single short pass rather than a device-by-device chore.
Yes. Everything lives in a rugged, carry-on-compliant case (14.4″ × 8.71″ × 13.15″), padlock-compatible, with an integrated power supply, and it runs from 0–50 °C.
No — it provisions over its own USB-C bus and can sync over Wi-Fi when you want it. An on-board Ethernet connector is there when you want to bring it onto a network.
The Data Deployment Kit is quoted per configuration. Use Request a Quote or email sales@getgotak.com and we'll scope it to your fleet size and devices.
More questions? Talk to sales at sales@getgotak.com.
Talk with our team →MAAK Data Deployment Kit · Fielded EUD provisioning
Dock up to ten GoTAK EUDs, clone one configured ATAK environment across all of them, and hand out devices that are charged, identical, and ready — from a single carry-on case.
Quoted per configuration · provisions up to 10 GoTAK EUDs · carry-on case
